Resin Heart Keychain

Hello everyone! Daisy here. I am back with another Resin DIY. Thank you for making time to read this blog.

Today we will be making a heart keychain.

For this we will need resin, alcohol inks, heart shape mould, a measuring scale, a paper cup, a popsicle stick (I have used a plastic one here), silicon glue and jump rings and keychain rings.

Before starting with the DIY, please make sure to use safety gear when working with resin. Please use a respirator and gloves.

First, we will mix the resin and hardener in the proportion of 2:1 using a measuring scale. I will be taking the measurements in grams. I will first pour the resin in the cup.

Next, I will pour the hardener. Since it is a 2:1 ratio resin, the quantity of the hardener will be half the quantity of resin.

After pouring both the resin and the hardener, we will mix it for 3 minutes and then let it sit for 1-2 minutes, so that the bubbles in the resin are released.

We will divide the resin into 2 parts. Mix white pigment into half of it.

We will leave the resin to become thick for 30-40 mins. After that we will pour it in the heart mould.

Next, we will add the alcohol inks. Here we will add 2 shades of pink

We will next pour strings of white resin and use a toothpick to swirl around the white resin.

After 18-20 hours, we will de-mould the pieces and put masking tape to the back of the piece.

We will next put a top coat of resin. Spread the resin evenly with your fingers.

After this layer cures, we will cut the excess resin off using a pair of scissors.

We will next use some silicone glue to stick the 2 pieces to each other. We will add a jump ring and a keychain ring to the top of the piece.

Your Heart Keychain is ready!

Do tag us if you make this piece!

Use Code DAISY05 while checking out at the Itsy Bitsy store to get 5% off on your purchase.

Products used in above DIY:


Alcohol inks:

Masking tape:

White pigment:

Heart mould:

Silicon glue:


Leave a comment

Your email address will not be published. Required fields are marked *